rack

Now that I have a half-height rack and a 3D Printer, I figured I should finally move all my Raspberry Pis from sitting in odd places in my office to the rack. And what better way than to print my own 1U Raspberry Pi Rack mount unit?

The rack unit you see above was assembled from 6 'frames', 6 hot-swappable Pi carrier trays, 2 rack mount ears, and a couple lengths of threaded rod for rigidity.

It was printed from these plans from russross on Thingiverse; Russ Ross also made an assembly video, and shows how you can build a 2U 12-Pi enclosure using the same basic design, with interchangeable Pi trays!

Video

There is more detail and a full walkthrough of my home rack in this video:

I am starting to rack up more Pis (quite literally) using the official Pi PoE HAT to save on cabling.

The one thing I hate most about those little HATs is the fact the fans spin up around 40°C, and then turn off a few seconds later, once the temperature is back down to 39 or so, all day long.

I'd be happy to let my Pis idle around 50-60°C, and only have the little whiny fans come on beyond those temperatures. Even under moderate load, the Pi rarely goes above 55°C in my basement, where there's adequate natural convection, so the fans would only really be necessary under heavy load.